Tower crane inspections & engineering · Ontario

You’re not just booking an inspection.You’re closing a compliance gap.

More than a structural sign-off. HITE helps crane owners, contractors and fleets understand what is required, identify gaps in their records and coordinate the inspections that come next.

Structural · Mechanical · ElectricalOne crane or an entire fleet
01 / Start with a clear picture

Before we go up,
we get the file in order.

An initial compliance audit reviews the crane’s records, inspection history and upcoming work. We identify apparent gaps, clarify what is due and build a practical plan for the in-person inspections.

You leave with a clear next step.

A summary of the information reviewed, outstanding questions, inspection milestones and the work to arrange.

A records audit does not replace the required engineering inspections or establish permission to operate.

From records to siteHITE / ENGINEERING
01

Review the records

Understand the crane, available reports, inspection dates, configuration and outstanding items.

02

Define the inspection

Coordinate the engineering disciplines, qualified technical input, access and testing arrangements.

03

Inspect & follow through

Complete the agreed site work, communicate findings and arrange required corrective-work verification.

A defined scope. Clear responsibilities. Practical next steps.
What records should we prepare?Crane details, previous reports, drawings and operating history

Crane identity & engineering basis

  • Make, model, serial number, manufacture year and project location.
  • Current configuration, manufacturer manuals, bulletins and recalls.
  • Foundation, support and tie-in drawings; relevant electrical and hydraulic information.

Inspection & operating history

  • Previous pre-erection, post-erection and annual reports; NDT and other specialist reports.
  • Maintenance, repairs, modifications and component-replacement records.
  • Erection, torque, operational/load-test records and routine inspection logs.
  • Outstanding findings and available evidence of corrective work.

Bring the records you have. We will identify what else is needed for the agreed review. PEO inspection standard ↗

02 / Understand the requirements

This is law.
Not just good practice.

Ontario Regulation 213/91 sets when tower crane engineering inspections are required. Ontario Regulation 260/08 prescribes the PEO standard for the applicable inspection work. These requirements support safe entry into service and continued operation—not simply the collection of a certificate.

The scope is broader than the structure.
Your inspection program needs to reflect that.
2023

Amendments introduced

O. Reg. 241/23 sets out the changes and phased implementation dates.

JANUARY 1, 2024

Broader inspections

Expanded component and system coverage, with recurring in-use inspections.

DECEMBER 2024

Revised PEO standard

The updated inspection standard is prescribed through O. Reg. 260/08.

JANUARY 1, 2025

Comprehensive inspection

The erection-linked 10-year requirement takes effect, alongside further design and procedural provisions.

O. Reg. 241/23 ↗ · PEO performance standards ↗

What changed for crane owners and contractors?A before-and-now comparison
TopicEarlier engineering-inspection frameworkWhat the program must address now
Engineering scopeStructural-focused inspection provisions.Structural elements plus electrical, mechanical, hydraulic and control systems.
In-use inspectionRecurring structural visual inspections already applied.The broader system scope at intervals no greater than 12 months, or more often where recommended by the manufacturer.
Older cranesNo specific comprehensive-inspection provision under s. 159.1.A comprehensive inspection before erection when the 10-year age or subsequent interval is due.
Climbing & reportingAn earlier inspection and reporting framework.Defined engineering inspections, supporting reports, findings and required corrective-work verification.

This is a comparison of the engineering-inspection framework, not a claim that other safety duties did not exist before 2024. PEO tower crane FAQ ↗

How the legal requirements fit togetherThe Act, the regulation, engineering practice and technical standards
THE DUTY

OHSA

Establishes responsibilities for workplace parties, including constructors and employers.

WHAT & WHEN

O. Reg. 213/91

Sets the inspection triggers, installation, testing, maintenance and record requirements.

ENGINEERING PRACTICE

O. Reg. 260/08

Prescribes PEO’s standard for the applicable tower crane engineering inspections.

TECHNICAL BASIS

Referenced standards

Includes applicable CSA Z248 and ESA provisions and manufacturer information. The relevant editions must be checked.

03 / Inspection & engineering services

The right expertise.
At every required stage.

Pre-erection, post-erection and annual inspections serve different purposes. HITE coordinates the engineering disciplines, specialist input and reporting around the work your crane needs.

01 / BEFORE ERECTION

Pre-erection inspection

Review accessible components, records and required testing before the crane is assembled.

  • Component identification, available crane records and previous reports.
  • Visual inspection, required structural NDT and supporting technical reports.
  • Findings and required corrective-work verification before erection.

O. Reg. 213/91, s. 158 ↗ · PEO Part A

02 / BEFORE FIRST USE

Post-erection inspection

Review the erected crane, supporting records and required checks before it enters service.

  • Installed configuration, erection records and relevant support documentation.
  • Site inspection, required tests, witnessing and technical reporting.
  • Engineering conclusions and required defect close-out before first use.

O. Reg. 213/91, s. 158 ↗ · PEO Part A

03 / WHILE IN SERVICE

Annual in-use inspection

Plan the recurring engineering inspection at no more than 12 months, or the manufacturer’s shorter interval.

  • Current configuration, crane logs and maintenance or repair history.
  • The applicable five-system scope and supporting test information.
  • Findings, reporting and required follow-up while the crane remains erected.

O. Reg. 213/91, s. 158 ↗ · PEO Part B

Every stage has its own requirementInspection milestone chart with regulation references
MilestoneWhat to coordinateO. Reg. 213/91
Before erectionRecords, component review, visual examination, required structural NDT and supporting reports.s. 158 · PEO Part A
Foundation & supportsDesign, pre-pour inspection, installation and strength confirmations, as applicable.s. 157
After erection, before useInstalled-crane inspection, erection records, tests, reporting and required defect close-out.s. 158 · PEO Part A
While erectedIn-use engineering inspection at no more than 12 months, or the manufacturer’s shorter recommended interval.s. 158(1)1.iii · PEO Part B
ClimbingBefore the initial climb and at no more than 12-month intervals. Separate pre-use and support/tie-in checks apply.ss. 159, 157 · PEO Part C
Comprehensive inspection dueBefore erection when 10 years have elapsed since manufacture, then the applicable subsequent interval.s. 159.1

Conventional-crane summary; crane type and manufacturer instructions matter. An annual inspection does not replace pre-erection, post-erection or other triggered work. O. Reg. 213/91 ↗

Five systems. Coordinated responsibility.What structural, mechanical, electrical, hydraulic and control-system review can cover
01

Structural

Load-bearing components, connections, fasteners and supporting structural inspection/NDT records.

02

Mechanical

Slew ring, brakes, gearbox, hook block and the relevant mechanical inspections and tests.

03

Electrical

Supply, grounding, wiring and electrical components, with qualified-person reports.

04

Hydraulic

Hydraulic components, connections, condition and findings within the appropriate engineering scope.

05

Control systems

Limit devices, emergency stops and other control functions addressed through the applicable tests.

Illustrative scope, not a complete inspection procedure or a requirement for five separate engineers. Each engineer takes responsibility within their competence and assigned scope.

When the project needs more.

Specialist inspection and engineering support can be scoped alongside the main milestones.

SPECIALIST SUPPORTClimbing systemsEngineering review before the initial climb and at the prescribed recurring interval.Scope details
  • Review climbing equipment and supporting records.
  • Confirm qualified personnel and the required engineering reporting.
  • Keep pre-use checks and support/tie-in inspections distinct from the engineering inspection.

O. Reg. 213/91, ss. 159 and 157 · PEO Part C

SPECIALIST SUPPORT10-year comprehensiveA deeper assessment before erection when the age or subsequent inspection interval is due.Scope details
  • Confirm manufacture date, previous comprehensive inspections and the next planned erection.
  • Define the applicable dismantling, examination, measurement and testing scope.
  • Record findings, corrections and required conclusions. Reaching the threshold while erected does not by itself require immediate dismantling.

O. Reg. 213/91, s. 159.1

SPECIALIST SUPPORTFoundations & tie-insEngineering for the structures supporting and restraining the crane.Scope details
  • Foundation, shoring and bracing design within the agreed assignment.
  • Applicable pre-pour and installed-condition inspections.
  • Required strength confirmations, installation records and subsequent inspection instructions.

O. Reg. 213/91, s. 157

SPECIALIST SUPPORTSelf-erecting & rail-mountedCrane-specific requirements—not the same schedule for every crane.Scope details
  • Self-erecting: before first service, then the earliest applicable trigger—12 months in use, 12 erections or the manufacturer’s recommended interval.
  • Rail-mounted: include the applicable track and track-foundation requirements.
  • Establish the crane type and inspection history when defining the scope.

O. Reg. 213/91, s. 158(1)2; s. 165 · PEO Parts D and E

SPECIALIST SUPPORTRepairs & deficiency follow-upDefine the corrective work and the evidence needed to close out identified defects.Scope details
  • Repairs follow the applicable manufacturer’s or engineer’s instructions.
  • Necessary follow-up inspection and testing are identified.
  • Required written verification is completed before use where the regulation requires it.

O. Reg. 213/91, s. 158(4)

SPECIALIST SUPPORTNDT & technical testingQualified technical input, coordinated with the engineering review.Scope details
  • Identify the appropriate non-destructive testing methods and supporting reports.
  • Check relevant personnel qualifications and test documentation.
  • Coordinate owner-engaged electricians, technicians and NDT providers within the agreed scope.

O. Reg. 213/91, s. 158 · PEO inspection standard

One coordinated assignment, with the work and responsibilities clearly defined.

Discuss your inspection scope
04 / The deliverable matters

One coordinated file.
Clear responsibility.

The report should help your team understand what was reviewed, what was found and what needs to happen next.

A clear engineering report

Crane and project identity, inspection scope, findings, limitations and the applicable service-readiness conclusion.

Discipline-specific responsibility

Structural, mechanical and electrical reporting as applicable, with each engineer identifying the work for which they take responsibility.

Supporting evidence & close-out

Technical and NDT reports, test results, photographs and required corrective-work verification in a coordinated reporting package.

HITEENGINEERING
REPORTING PACKAGE

Tower crane
engineering review

01Scope & engineering conclusions
02Structural / NDT documentation
03Mechanical / hydraulic documentation
04Electrical / control documentation
05Supporting reports & deficiency close-out
Illustrative reporting structure.
Required corrective work is not an optional upgrade.

Where the applicable inspection identifies defects, the required repairs, re-inspection and written engineering confirmation must be completed before use. Optional CraneCare support is separate from those requirements. O. Reg. 213/91, s. 158(4) ↗

Who is responsible for what?Owner, constructor, employer, technical personnel and engineer

Crane owner

Arrange the required engineering work, supply crane records, engage the necessary qualified personnel and address identified defects.

Constructor

Coordinate overall project compliance and keep the required drawings and reports available at the project.

Employer

Maintain the crane and arrange the required competent-worker inspections, operational tests and records for its activities.

Erector & technicians

Perform the authorized work and provide configuration, installation, torque and technical test records for the engineering review.

Responsible engineer

Perform or direct the applicable inspections, assess supporting reports and issue conclusions within their competence and defined responsibility.

HITE coordinates the engineering assignment. A service agreement does not transfer statutory duties from the responsible workplace parties.

CraneCare
05 / Year-round engineering support

What if HITE looked after
your cranes all year?

One inspection addresses a milestone. A coordinated program helps you plan the next one. CraneCare brings your inspection calendar, records and engineering support into one ongoing relationship.

One craneAn active projectAn entire fleet

Choose an individual inspection or an agreement built around the cranes and work you need covered.

Included inspections, site attendance and ongoing support are defined in your agreement.

01

Inspection dates, tracked

A forward plan for the named cranes, their inspection history and upcoming erection, climbing and in-use milestones.

02

Records, coordinated

Keep engineering reports, supporting technical records and outstanding information organized.

03

The right disciplines, aligned

Coordinate structural, mechanical and electrical input and the required specialist testing.

04

Deficiencies, followed through

Track identified actions and arrange the verification required within the agreed assignment.

05

A continuing engineering relationship

Defined technical support as your crane, site or fleet requirements change.

What can a CraneCare agreement include?Planned inspections, records coordination and defined engineering support

Build the agreement around your work

  • A named crane or fleet register and inspection calendar.
  • Agreed engineering inspections and site attendance.
  • Document review, coordination and status updates.
  • Defined technical support and deficiency follow-up.

Define the responsibilities from the start

  • Identify which cranes, sites and milestones are covered.
  • State the access, records and specialist personnel the client provides.
  • Clarify third-party testing, repairs and additional attendance.
  • Agree how changes and work outside the scope are handled.

CraneCare is a defined service agreement, not blanket certification or unlimited attendance. Required operational checks, maintenance and workplace duties continue separately.

06 / Make an informed decision

Three assumptions
worth checking.

A coordinated program starts with knowing which records, inspections and responsibilities apply to your crane.

THE ASSUMPTION

“The rental company’s engineer already signed it.”

Previous reports are useful inputs. They do not replace the current project’s required post-erection or recurring in-use inspection.

THE ASSUMPTION

“The structural engineer covers everything.”

All five systems must be addressed. Engineering responsibility must match the competence and scope of the engineer or engineers involved.

THE ASSUMPTION

“The inspection is entirely the engineer’s job.”

The review also depends on access, records, qualified technical input and corrective work from the relevant workplace parties.

A few useful answers.

Does the initial audit replace an engineering inspection?

No. A records audit identifies available information, apparent gaps and next steps. Required site inspections, testing and engineering reports still need to be completed.

Does an annual inspection replace pre-erection or post-erection?

No. For conventional tower cranes, these are separate milestones. The recurring in-use interval is no more than 12 months, or the manufacturer’s shorter recommended interval.

Does a 10-year-old crane need to be dismantled immediately?

The comprehensive inspection is tied to erection when due. Reaching the threshold while erected does not, by itself, require immediate dismantling. Crane history and the next planned erection matter. Ontario guidance ↗

Who carries out the electrical, mechanical and NDT testing?

The agreed scope identifies the qualified electricians, technicians and NDT providers required, the supporting reports and the engineering direction and review. Owner-engaged specialist personnel are coordinated within the assignment.

Can HITE use existing reports?

Existing reports can be important inputs. The responsible engineer reviews their relevance and adequacy for the current crane configuration, project and inspection scope. An earlier report is not automatic confirmation of current readiness.

Do daily, weekly and monthly checks still apply?

Yes. Required competent-worker inspections, maintenance and operational tests continue separately from the engineering inspection. CraneCare supports coordination; it does not replace those duties.

Regulations and technical references

General information. Inspection scope and timing depend on the crane type, configuration, history, manufacturer requirements and applicable provisions. The agreed engineering assignment defines the services provided.

Your next step

Start with what you know.
We’ll help with the plan.

Tell us about your crane, project or fleet. HITE will discuss the initial review, required inspections and ongoing support appropriate to your work.

Contact HITE905-812-3709

Mississauga · Serving projects across Ontario